Showing all 9 results
-
$318.00
5 Bolt cambered Drive Flange ADW530
Strange Oval Drive Plate Features & Benefits:
Drive Plate ADW530 (Cambered)
Strange Oval Introduces Their New 5-on-5 Cambered Drive Plate For Asphalt Late Model. They fit Howe, PCR & Vogel style 5-on-5 hubs.
It’s over 1 pound lighter than other equivalent drive plates available and allows for up to 2° of rear camber with straight splined axles.
The hub cap comes with 3 socket head cap screws.
The (optional) race-day aluminum bullet weighs 0.35 lbs. and slides over the existing flat hub cap and is secured with the same flat cap socket head screws.
The bullet cap has an indexed fit so the pre-machined lug nut lines on the cap line up exactly with the wheel studs every time.
The axles can be removed without having to remove the drive plate from the hub. Simply remove the drive plate hub cap and pull the axle straight out of the axle tube.
-
$274.00
5 Bolt Axle Drive Flange ADW520
Strange Oval Drive Plate Features & Benefits:
Drive Plate ADW520 (for cambered rear applications)
-
- 2 degrees of maximum misalignment
-
- Hardened components to reduce wear and increase useful life
-
- Polished articulating insert gear to improve efficiency and decrease running temperatures
- Drive flanges are plated to prevent rust
- This Strange Oval drive plate ADW520 consists of an all-steel housing and a tempered steel splined insert that articulates within the steel housing and allows for up to 2 degrees of rear camber adjustment. This drive plate is specifically for the 5-Lug, WIDE-5 hub applications. Used in conjunction with Strange Oval axles, our spline tolerances (between the axle splines and drive plate splines) are tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval drive plates will work with virtually every 24-spline outboard axle end on the market.
-
-
$137.00
5 Bolt Axle Drive Flange ADW550
Strange Oval Drive Plate Features & Benefits:
Drive Plate ADW550 (5-Lug, WIDE-5 SMART HUB only)
-
- Lightweight and high strength billet aircraft aluminum construction
-
- Pressed in steel spline insert for increased wear resistance and long spline life
-
- Flanged steel sleeve mounting hole bushings resist distortion and provide longer service life
-
- Fully CNC manufactured for consistent and accurate fit
- Mill scalloped to reduce weight
- The Strange Oval drive plate ADW550 is used exclusively for rear 5-Lug, WIDE-5 SMART HUB applications that are commonly used on the Northeast Dirt Modified applications. These drive plates consist of all-aluminum housing with a pressed in steel splined insert and steel sleeved lug mount holes. Used in conjunction with Strange Oval axles, our spline tolerances (between the axle splines and drive plate splines) are tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval drive plates will work with virtually every 24-spline outboard axle end on the market.
-
-
$131.25
5 Bolt Axle Drive Flange ADW570
Strange Ovals` IMCA, UMP & Renegade Dirt Modified axle drive plate is an all-aluminum housing with a pressed in hardened steel splined insert, and is specifically for the 5-Lug 4.75” & 5” bolt pattern applications. Used in conjunction with Strange Oval axles, our spline tolerances (between the axle splines and drive plate splines) are tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. This Strange Oval drive plate will work with every 24-spline outboard axle spline on the market.
-
$123.00
5 Bolt Wide 5 Hub Drive Plate ADW500
Strange Oval Drive Plate Features & Benefits:
Drive Plate ADW550 (5-Lug, WIDE-5 SMART HUB only)
-
- Lightweight and high strength billet aircraft aluminum construction
-
- Pressed in steel spline insert for increased wear resistance and long spline life
-
- Flanged steel sleeve mounting hole bushings resist distortion and provide longer service life
-
- Fully CNC manufactured for consistent and accurate fit
- Mill scalloped to reduce weight
-
-
$123.00
8 Bolt Axle Drive Flange ADW800
Strange Oval Drive Plate Features & Benefits:
Drive Plate ADW550 (5-Lug, WIDE-5 SMART HUB only)
-
- Lightweight and high strength billet aircraft aluminum construction
-
- Pressed in steel spline insert for increased wear resistance and long spline life
-
- Flanged steel sleeve mounting hole bushings resist distortion and provide longer service life
-
- Fully CNC manufactured for consistent and accurate fit
- Mill scalloped to reduce weight
-
-
$274.00
8 Bolt Axle Drive Flange ADW820
Strange Oval Drive Plate Features & Benefits:
Drive Plate ADW520 (for cambered rear applications)
-
- 2 degrees of maximum misalignment
-
- Hardened components to reduce wear and increase useful life
-
- Polished articulating insert gear to improve efficiency and decrease running temperatures
- Drive flanges are plated to prevent rust
- This Strange Oval drive plate ADW820 consists of an all-steel housing and a tempered steel splined insert that articulates within the steel housing and allows for up to 2 degrees of rear camber adjustment. This drive plate is specifically for the 8-Lug, WIDE-5 hub applications. Used in conjunction with Strange Oval axles, our spline tolerances (between the axle splines and drive plate splines) are tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval drive plates will work with virtually every 24-spline outboard axle end on the market.
-
-
$195.00
Nascar Drive Plate ADC100
Used in conjunction with Strange Oval axles, our spline tolerances, between the axle splines and drive plate splines, is usually tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval offers several steel drive plates that will accommodate a camber range of zero to 4 degrees. Depending on where your current rules regarding allowable camber lies (if any)
-
- Nickel Chromium Molybdenum steel is used for excellent hardenability, strength and toughness – This provides less spline wear and general drive plate longevity
-
- FEA (Finite Element Analysis) analyzed lightweight scalloped and pocketed design
-
- Marquenching heat-treat processing reduces internal stresses and stress cracks
-
- Electro-polished surface enhances surface finish which is especially beneficial on the spline flanks for reducing friction, wear and operating temperature
- Broached splines promote consistent fit and misalignment angleDrive Plate #ADC100 can be run with standard crowned spline axles that can accommodate 0 to 2 degrees of camber (with this drive plate, crowned axles are what sets any camber angle)
-
-
$349.00
Nascar Drive Plate ADC102
Used in conjunction with Strange Oval axles, our spline tolerances, between the axle splines and drive plate splines, is usually tighter and more uniform. These “closely mated” tolerances will provide better spline life of both the axles and drive plates. Strange Oval offers several steel drive plates that will accommodate a camber range of zero to 4 degrees. Depending on where your current rules regarding allowable camber lies (if any)
-
- Nickel Chromium Molybdenum steel for excellent hardenability, strength, and toughness to provide good spline wear and drive flange longevity
-
- FEA (Finite Element Analysis) analyzed lightweight scalloped and pocketed design
-
- Dry film solid lubricant applied to insert gear to prevent galling and increase lubricity
-
- Marquenching heat-treat processing reduces distortion and residual stress
-
- electropolishing enhances surface finish especially beneficial on the spline flanks for reduced friction, reduced wear, and lower operating temperatures
- Broached splines promote consistent fit and misalignment angle
- 2 piece drive plate #ADC102 can be run with standard crowned spline axles and can accommodate 0 to 3.5 degrees of camber with the articulating splined insert. This drive plate must be used with the standard crowned splined axles (not straight splined axles – see drive plate ADC102)
-